Audi allroad 2001, Owner'S Manual

Page: 83 / 306

CONTROLS AND
How to coordinate the remote con­
trol to a memory button
You can use the remote control to recall an
individual seating position stored in memo­
ry.
In order to recall stored seat and mirror posi­
tions from the memory with the remote
control, a specific memory button must be
assigned to the transmitter units.
82
The first factory provided transmitter unit
should be programmed to memory button 1
and the second transmitter unit to button
2.
If required, you can order an additional re­
mote control transmitter from an authorized
Audi Dealer, which should then be pro­
grammed to memory button 3.
Assigning stored settings to the remote
control:
After you have stored all settings under a
memory button, you can assign this setting
to the remote control.
•
Briefly press the memory button to be
coordinated with the remote control.
Wait until the seat, the outside mirrors and
the steering wheel have reached their
stored position.
• Press the same memory button a second
time and hold while depressing the unlock
button on the remote control. Release the
memory button after
2
seconds.
The memory button on the seat is now coor­
dinated with the remote control.
Notes
•
If you coordinate a remote control to
a
'new' memory button on the driver's seat,
the coordination with the 'old' button will be
erased.
• The coordination between the remote
control and a memory button will remain in
effect even if the settings under the
memory button on the driver's seat have
been changed.
• In addition, it is possible to erase a single
key assignment to a specific memory but­
ton.
Press and hold the memory button while
pressing the unlock button on the master
key with remote control for about
1
0
sec­
onds. Then release the memory button af­
ter about
2
seconds.