Audi allroad 2001, Owner'S Manual

Page: 161 / 306

CONTROLS AND
Wiper and washer system
The wiper and washer system only works
when the ignition is on.
The
heated washer jets
do not have a
separate switch. Depending on the outside
temperature, the heated washer jets will
operate when the ignition is on.
To prevent damage to the w1pmg
system. always loosen blades frozen
to glass before operating wipers.
Notes
•
Filling washer container, see page
250.
•
Replacing wiper blades, see page
251 .
�
WAR N I N G
Always heed WARNINGS on
page 1 6 1 .
1 60
Windshield
•
Wiper off:
Lever in position
0
•
One-tap wiping
Lever in position
1
•
Intermittent wiping:
Lever in position 2
You can adjust to wiping intervals to four dif­
ferent settings using the small lever
A.
Turn the small lever
A
to the right- shorter intervals
Turn the small lever
A
to the !eft - longer intervals
In each setting, the intervals are also con­
trolled by the speed of the vehicle.
•
Low wiper speed
Lever in position
3
•
High wiper speed
Lever in position
4
Automatic wiper
I
washer
Pull lever toward steering wheel and hold ­
wipers and washer work (position
5).
When the lights are on, the headlight wash­
ers are also activated when the lever is held
in this position for more than about one sec­
ond.
Release lever -
The washer stops and the wipers keep
going for about four seconds.