Audi allroad 2001, Owner'S Manual

Page: 155 / 306

CONTROLS AND
Manual mode
To switch from the automatic mode to the
manual mode, press button
(1)
or
(3)
for at
least 2 seconds. Press again to return to the
automatic mode.
The yellow LED in the display (2) will be lit
in the manual mode.
1 54
Increasing the vehicle ride height
manually
To make certain that the system functions
properly, do not raise the vehicle ride height
unless the engine is running.
Press button
(3)
to adjusting the vehicle to
the
next higher level,
ending at the
high
laval.
Once you are in the high level, you can go to
the
highest laval
by pressing the button
again.
Levels that have been selected but not yet
reached by the vehicle are indicated by flas­
hing LED's in the level indicator (2).
The current actual level is indicated by conti­
nuously lit LED's.
Manually lowering the ride height
Press button
(1)
to go to the
next lower
laval.
You can repeat this until you've se­
lected the
low level.
The next level that was selected but has not
been reached by the vehicle is indicated by
a continuously lit LED in the level indica­
tor (2).
The current actual level is indicated by flas­
hing LED's.
Notes
•
The control operations are dependent on
the vehicle's current speed. For example, it
is not possible to manually switch to the
·high level or highest level when the vehicle
is going above a certain speed.
Likewise, if ·you. have already selected the
high or highest level, and the vehicle speeds
up above a certain speed, the system auto­
matically switches down to the next lower
level.
For example, at about 20 mph (35 km/h) the
vehicle will lower from the highest level to
the high level. Beginning at about 50 mph
(80 km/h), the system switches from the
high level to normal level.