Audi allroad 2001, Owner'S Manual

Page: 175 / 306

CONTROLS AND
,
· ·- - - - - . .
.
..
�-//
1 - Channel 1
2 - Channel 2
3 - Channel 3
A - Indicator Light
B - Optimal placement of hand-held
transmitter during training.
1 74
Initial Programming of the
Audi HomeUnk® Universal
Transmitter
1
-
Turn the
ignition
switch o
n
.
2 - Prepare for programming the
Homelink® Universal Transmitter by
erasing the three factory default chan­
nels:
Simultaneously press and hold chan­
nels 1 and 3 - releasing only when the
indicator light (A) begins to flash after
20 seconds.
3 - Hold the end of the hand-held transmit­
ter of the device you wish to train
approximately 2 inches away from the
surface of the Homelink® channels -
. keeping the indicator light in view.
4 - Using both hands, simultaneously push
the hand-held transmitter button and
one
of the
Homelink®
channels. Do
not release until step 5 has been
com­
pleted.
. .... . ..
.
5 - The Home link® indicator light will flash
first slowly, and then rapidly. When the
indicator light flashes rapidly, both the
button and channel may be released .
If you wish, repeat procedures 3 through 5
to program the remaining channels.
If a garage door opener has been pro­
grammed
but does not activate with
Homelink®,
proceed to the
following
sec­
tion: "Training a Garage Door Equipped with
Rolling Code"