Audi allroad 2001, Owner'S Manual

Page: 146 / 306

Cancelling speed limit
Press the test button for at least 1 second
when the yehicle is moving at a speed
above
3
miles
(5 km/h).
The display will
show the warning symbol crossed through
to confirm that the speed limit has been
cleared.
Speed warning
2
82
When the ignition is switched off, the driver
can store a
permanent speed limit
warning
in the unit.
The warning is shown in the display as de­
scribed. The warning symbol only goes out
once the road speed has fallen below the
stored value again.
We recommend to store this speed limit
v:'arning if you wish to be reminded of a par­
ticular speed limit in addition to speed limit
warning
1 .
(For instance when driving in
countries with general speed limits or if a
particular speed should not be exceeded
when winter tires are fitted, etc.)
Selecting speed limit
•
Press the test button briefly with the
ignition switched off.
The mileage re­
corder display will then light up.
•
Press the test button again and hold for
at least
2
seconds. The speed limit currently
set appears in the display.
•
To change the speed limit, press the top
or bottom of the function selector switch for
the trip computer (see arrow illustration).
The speed limit displayed will then increase
or decrease by
6
miles (1
0
km/h) at a time.
CONTROLS AND EQUIPMENT
•
A few seconds after the button is re­
leased, the display lighting goes out again.
Cancelling speed limit
P_ress the .test button briefly
with the igni­
tion sw1tched off;
the display will light
up. Press the test button again for at least
2
seconds: the display will show the .speed
limit currently set. Now press and hold the
" Reset" button for the trip computer until
the crossed-out warning symbol appears.
145