Audi allroad 2001, Owner'S Manual

Page: 82 / 306

Memory for front seats*
You can store and recall 3 difference seat
positions for the driver and front passenger
seats using the memory buttons located in
the front doors. When you store the seat
position for the driver's seat, you can also
set and store the position of the outside mir­
rors and steering column position*.
The system works with the ignition
switched on or off.
Memory for driver's seat
The "STOP" button must be depressed in
order to store and recall the required set­
tings.
Memorizing seat. mirrors and
steering wheal• positions and ad­
justments
•
Adjust the seat.
•
Adjust both outside mirrors (see
page
72).
•
Adjust steering wheel (see page
99).
• Press " Memory" button and hold. At the
same time press one of the three numbered
recall buttons for at least 1 second.
•
Release the buttons.
·
The positions are now assigned to that par­
ticular button and stored in the memory.
CONTROLS AND EQUIPMENT
Notes
• If you memorize a new setting, the pre­
vious setting on that button will be erased.
•
We recommend that you begin with but­
ton
1 ,
and assign each subsequent driver a
particular button. This is especially impor­
tant for optimum utilization of the remote
control.
•
If the vehicle battery is disconnected, all
memorized setting will be erased.
81