Audi allroad 2001, Owner'S Manual

Page: 177 / 306

CONTROLS AND
Reprogramming a Single Audi
HomeLink® Universal Transmit­
ter Channel
If a Homelink® channel has been pro­
grammed to activate a device, and it has
been decided to program another device us­
ing the same Homelink® channel, follow
these steps:
Press and hold the desired Homelink®
button for approximately 20 seconds.
Do
not
release until step 3 has been
completed.
2 - When the indicator light begins to flash
slowly, position the hand-held transmit­
ter approximately 2 inches away from
the Homelink® surface. Press and
hold the hand-held transmitter button.
3 - The indicator light will flash, first slowly,
and then rapidly. When the indicator
light begins to flash rapidly, release
both the button and channel.
The previous device has now been erased
and the new device has been programmed
into Homelink®. This procedure will not af­
fect any other programmed Homelink®
channels.
1 76
Accessories
Accessories for the Audi Homelink® Uni­
versal Transmitter are available through vari­
ous sources.
If you would like additional information on
Homelink®. where to purchase the
Homelink® compatible products, or would
like to purchase the Homelink® Home
Lighting Package, please call toll-free:
1-800-355-3515.
Notes
This device complies with FCC rules
part 15. Operation is subject to following
conditions:
1
-
This device may not cause any harmful
interference and
2 - This device must accept any interfer­
ence that may be received including in­
terference that may cause undesired
operation.
�
WARNING
The transmitter has been tested
and complies with FCC and DOC/
MDC rules. Changes or modifica­
tions not expressly approved by
the party responsible for com­
pliance could void the user's au­
thority to operate the device.
DOC: ISTC 1 763 102 264
Prince MODEUFCC ID: CB2 V94800