Audi allroad 2001, Owner'S Manual

Page: 141 / 306

CONTROLS AND
Test button
The test button can be used to perform the
following functions:
Checking the display
With the car stationary and with the ignition
on, you can check the symbols one after the
other by briefly p
u
sh
in
g on the knob. The en­
gine
can
either be running
or
not. Perform­
ing
this brief check assures you that the dis­
play is functioning properly. When driving,
you cannot check the function.
1 40
Calling up driver information
When a first priority symbol is flashed up,
the accompanying driver information can be
called up in the display for assistance.
For example: "SWITCH OFF ENGINE;
CHECK OIL LEVEL".
Press the test button to call up this display.
The information disappears about 5 sec­
onds after the button is released again.
Operation
After switching on the ignition in selector le­
ver position P or N, the driver instruction
"WHEN STATIONARY APPLY FOOT­
BRAKE WHILE SELECTING GEAR'' will ap­
pear.
When a gear ("R", "0", etc.) is selected,
the driver instruction disappears and a func­
tional check is carried out automatically as
a result of operating the brake pedal.
If the functions monitored by the auto­
check system are working properly, the let­
ters "OK" will light up for a few seconds.