AUDAC R2, User Manual

Page: 41 / 60

41
be removed again from this listbox by selecting them, and clicking the “Remove Input”
button. A maximum of 24 signal inputs can be selected. The inputs which are selected in
this listbox, are available for all zones which can be controlled by this DW5066 wall panel.
Those inputs are not linked with the quick menu like the inputs on the DW3020/4020 are.
4) Certain actions such as Volume change, Input change, Mute change, Tone control
change and settings change can be blocked by checking the checkboxes.
5) The microphone input has the possibility to p15V phantom power for powering
condenser microphones. The phantom power can be switched ON and OFF by clicking
the “Enable Mic Phantom” checkbox. This setting can also be changed in the DW5066
settings menu. (If “Block settings menu” is not checked)
6) The Backlight level, screensaver and screensaver delay can be set by means of three
dropdown boxes. This setting can also be changed in the DW5066 settings menu. (If
“Block settings menu” is not checked)
7) When the settings are made, press the “Save to Wallpanel” button and the settings will
be send to the selected DW5066 wall panel.
Previously made settings can be retrieved from the wall panel by clicking the “Load from
Wallpanel” button. Hereby, the settings which are stored in the wall panel will be displayed
in this window, making it possible to make any changes to the current settings.
Maximum cable length for DW5066
The maximum cable length for the DW5066 wall panel is 300 meter.