AUDAC R2, User Manual

Page: 24 / 60

24
Zone settings >> Zone linking
The “Zone Linking” window offers the possibility to link several zones with each other,
making the zone settings like volume and routing coupled with each other. There is the
possibility to make a permanent linking or a linking under certain conditions (priority
contact) between the different zones.
Linking
All zones which can be linked to the selected output zone are shown in a list underneath
each other. Next to each zone name, a dropdown list is shown whereby the linking can
be selected. The standard setting is set to “Not linked”, and the linking method can be
selected between “Linked by Prio contact 1”, “Linked by Prio contact 2”, and “Fixed
Linked”.
When several zones are linked with each other and any change is made to the volume or
routing settings from one of the linked zones, the other linked zones will automatically
follow the same changes made to the settings.
Linked by priority contact
When the “Linked by Prio contact 1” or “Linked by prio contact 2” options are selected,
the zones will be linked with each other when a connection is made between the priority
contacts which are provided on the rear side of the R2. The linking between the zones will
remain as long as the contact is established. For example, this can be done by means of a
switch or relay.
Fixed Linked
When the ‘Fixed Linked” option is selected, the linking between the zones will be
permanently present.
Slave
When a zone already is linked with another zone, the linked zone will be called the “Slave”
from the “Master” zone and the linking settings for this zone will be unavailable. When
selecting the “Zone Linking” for this zone, the message “Zone is already slave of another
zone” will appear.
Back
Click the “Back” button to go back to the previous window.
Zone linking