AUDAC R2, User Manual

Page: 29 / 60

29
Settings >> Network settings
In this window, the network settings of the R2 can be adjusted.
The IP address is standard set to 192.168.0.191 and the subnetmask is standard set to
255.255.255.0.
Click the “OK” button to confirm the network settings.
Network Settings
Settings >> Paging settings
In this window, the paging volume for each individual zone can be set by means of the
dropdown boxes displayed next to the zone names. The paging volume can be set in steps
of -1 dB, starting by 0 dB, going to -
∞
. When the volume is set to 0 dB, announcements
for the corresponding zones will be made on maximum volume.
Back
Click the “Back” button to go back to the configuration screen.