33
Address Settings
Settings >> Fiber settings
In this window can be set which audio signals of the R2 should be transmitted over the fiber
interconnection interface.
NOTE
The fiber interconnection interface is an optional module for the R2. (OPT2)
The settings which are made in this window will only affect when the internal fiber
interconnection interface of the R2 is installed.
The software of the R2 matrix supports to transfer up to 8 stereo channels over the fiber
interconnection interface.
In the “Fiber Settings” window of the web based user interface is an overview given of all
the channels which can be transmitted over the fiber interconnection interface, numbered
from “Fiber Channel 1” to “Fiber Channel 8”. Next to each channel is a dropdown list
displayed where can be selected which of the audio channels should be transmitted over
the corresponding fiber bus channel.
In this dropdown list are all direct line inputs, all wall panel inputs, all priority inputs and all
additional DSP generated signals displayed.
When an audio channel should be transmitted over a fiber channel, simply click the audio
channel in the dropdown list of the desired fiber channel.
Click the “Back” button to go back to the configuration screen.
For more information about cascading the R2 and the fiber
interconnection interface, refer to
Chapter 8: Cascading the R2
of this
user manual.
Summary of Contents for R2
