AUDAC R2, User Manual

Page: 31 / 60

31
Next to every output zone is a dropdown list displayed whereby the volume can be selected
in steps of -1dB.
The switching to and from a priority signal is done according to the
HARDIN - FADEOUT
principle. This means when a priority situation occurs (signal present on the priority audio
inputs or connection between priority input contacts) , immediately will be switched to the
selected priority action. When the priority situation is over (no more signal present on the
priority audio inputs or no more connection between the priority input contacts), the status
of the R2 will return to the previous status by fading the sound in.
Click the “OK” button to confirm the priority settings.
Priority Settings
Settings >> System configuration
In this window, the configuration settings for external connected devices such as paging
consoles and wall panels can be made. This window shows three buttons, each of them
for configuring one kind of external connected devices. Click the ‘Paging’ button when the
configuration for the APM1xx paging consoles has to be made, while the ‘DW5066’ button
enables to configure the settings for the All-in-one wall panels, and the ‘DW3020/4020’
enables you to configure the settings for the basic wall panels.
Just click the corresponding button to proceed to the settings menu.
For more information about the connection and configuration possibilities
for external connected devices, refer to
Chapter 6: Peripheral
Interfaces of this user manual. In this chapter is extensively described
how the connection and configuration for peripheral equipment should
be done.
Back