Auber Instruments WSD-1500H-W, Operation & Instruction Manual

Page: 14 / 32

14/31
to exit the menu. Or, you can use
▲
or
▼
key to go to “Back”, and press SET key to
exit. The display can also return to the normal display mode if no key is pressed in about
15 seconds.
00000000000000000000
00000000000000000000 >Step 1 SmkrTemp 250
1- End i ng by Fd Temp
00000000000000000000
00000000000000000000 > 1- End i ng by Fd Temp
1 -Fd Temp 195
00000000000000000000
00000000000000000000 > Back
Step 1 SmkrTemp 250
00000000000000000000
00000000000000000000 > 1-T i me 10 : 00
Step 2 SmkrTemp 250
00000000000000000000
00000000000000000000 Smkr 137 Food 122
Set 250 Probe3 270
Step 1 SmkrTemp 250 Step 1 SmkrTemp 120
1- End i ng by Fd Temp
1- End i ng by Time
1-T i me 10 : 00
1-T i me 2 : 00
00000000000000000000
00000000000000000000 >Step 2 SmkrTemp 250
2- End i ng by Fd Temp
00000000000000000000
00000000000000000000 >2-End i ng by Fd Temp
2-Fd Temp 195
00000000000000000000
00000000000000000000 >2-Fd Temp 195
Step 3 SmkrTemp 250
Step 2 SmkrTemp 250 Step 2 SmkrTemp 190
2- End i ng by Fd Temp
2- End i ng by Fd Temp
2-Fd Temp 195 2-Fd Temp 160
SE T
SE T
SE T
SE T
SE T
SE T
SE T
/
/
/
/
/
/
SE T
SE T
SE T
SE T
SE T
SE T
Figure 18. How to enter a cooking profile.
The example program in table 1 is used in this flow chart as a demo.
4.1.2 Single-Step Mode
In single-step mode, you can only access and change the target cabinet temperature of
Step 1 from the device. The controller will try to maintain the smoker temperature at the
set temperature (Smkr Temp) of Step 1 continuously as long as the controller is powered
on. If this controller is powered off and turned back on again, it will resume operating in
this mode. You can still view and change settings in other steps in Cooking Profile on the
Aubersmart app, but they don’t apply to this mode.
To change the set temperature in single-step mode, press SET key once, it will show