ATX TranScend Operation Manual Download

Page: 42 / 102

FRONT PANEL LCD DISPLAY

4-28

TranScend Chassis – Operation Manual

Status

OptPwr (dBm)

Attn (dB)

Mode

Laser Temp (C)

OPout Pwr(dBm)

Prev Menu

Alarm

OptPwr

Syn Lock

Laser Temp

OPout Pwr

Module Temp

Prev Menu

Chassis

Temperature(C)

Model

HW Ver

SW Ver

Ser #

Prev Menu

Table 7: TranScend Stacker Front Panel Display Menu Overview

Greeting:
Greeting Message

Press “Select” button to go into the plug-in menu.

Prev Menu:

Press “Select” will bring back to the System menu.

The entries in plug-in menu are described as follows:

Setup Menu:

Sel Ch:

Press “Select” to select the desired channel. Press “Right” or “Left” button to cycle through available

channels.

Mode Setting Menu:

Mode:

To select AGC or MGC mode. Press “Right” or “Left” button to select desired mode.

Save:

To select yes or no to save the change into NVRAM by pressing

“Right” or “Left” button.

Attn Setting Menu:

This is settable only when Mode Setting is in MGC mode.

InnoTrans Communications
OptoStacker

CHAPTER 4:

Summary of Contents for TranScend







































































































Search results

Summary of Contents for TranScend

Reviews:

Related manuals for TranScend

Brands by name

Popular brands

ATX TranScend, Operation Manual

Search results

Summary of Contents for TranScend

Reviews:

Related manuals for TranScend

Brands by name

Popular brands