ATV FA4-120, User Manual

Page: 56 / 81

User’s Manual
Network Setup Screen
In the
Network Setup screen you can set up the DVR for LAN and modem connections.
Figure 60 — Network Setup screen.
Highlight the box beside
Connection . Press the button to toggle between LAN and Modem .
Highlight the box beside
Admin Password and press the button. A virtual keyboard appears.
You will first be asked to enter the current password. Then you can enter a new password; you will
be asked to confirm the new password before it is accepted.
Highlight the box beside
User Password and press the button. A virtual keyboard appears.
You will first be asked to enter the current password. Then you can enter a new password; you will
be asked to confirm the new password before it is accepted.
NOTE: These passwords are for network use. They are different from the Admin and User
passwords for the DVR itself.
NOTE: The passwords are case sensitive. The factory default password for both
Administrator and User is
12345678 .
CAUTION: Write the password down and keep it in a safe place. Once the
password has been reset, the default will no longer work. If the password is
forgotten, the unit must be reset using the
Factory Reset Button and all data
settings will be lost.
The
transfer speed indicates image rate transferred to each RAS. Highlight the box beside
Transfer Speed, press the button, and adjust the number.
NOTE: The maximum transfer speed over a LAN is 30 images per second ( 25 ips for PAL)
when the resolution is set to Standard . However, when setting to High, the transfer speed will
be decreased to 15 images per second ( 12.5 ips for PAL).
46