Four-Channel Digital Video Recorder
Callback Center Setup Screen
Figure 63 — Callback Center Setup screen.
The DVR can be set up to contact a computer running RAS (Remote Administration System) on a
LAN when an event occurs. Also it can be set up to dial a pager with a numeric message when an
event occurs if you have a modem connected to the DVR.
NOTE: When the DVR is networked with LAN connections, you can set up the callback center
by both LAN connections and modem connections.
Callback Center Setup by LAN connections
Highlight the box beside
IP Address
and enter the IP address of the computer you want contacted
during an event.
Highlight the box beside
Retry
and enter the number of times you would like the DVR to try
contacting the computer. You can select from 1 to 10 retries.
Callback Center Setup by Modem connections
Highlight the box beside
Device
and press the button. Select
External Modem
or
None
from
a drop-down menu.
NOTE: When you select External Modem, the DVR doesn’t support the callback for text-in.
Set the DVR for LAN connections for text-in callback.
Highlight the box beside
Pager Number
and enter the telephone number of the pager. Enter the
number as it must be dialed from your telephone system; e.g., if you must dial “9” for an outside
line, enter “9” before the pager number.
Highlight the box beside
Mailbox
and enter the voice mailbox number if your pager uses a voice
mailbox.
Highlight the box beside
Site ID
and enter a three-digit site ID number.
49
Summary of Contents for FA4-120
