ATV FA4-120, User Manual

Page: 21 / 81

Four-Channel Digital Video Recorder
Chapter 3 — Configuration
NOTE: Your DVR should be completely installed before proceeding. Refer to Chapter 2 —
Installation .
Front Panel Controls
Figure 17 — DVR front panel.
Many of the buttons on the front panel have multiple functions. The following describes each
button and control. Take a few minutes to review the descriptions. You will use these to initially
set up your DVR and for daily operations.
NOTE: A separate Alarm button is not provided. Pressing any keys on the front panel resets
alarm output including the internal buzzer when the alarm is activated. However, when you
are in the menu or PTZ mode, you have to exit the menu or PTZ mode first to reset alarm
output.
Power LED
The POWER LED is lit when the DVR is On.
Alarm LED
The ALARM LED is lit when alarm output or internal buzzer is activated.
REC LED
The
REC LED
is lit when the DVR is recording. When the DVR is in the panic recording mode,
the RCE LED flickers.
Network LED
The NETWORK LED is lit when the unit is networked either via Ethernet or modem.
11