ATV FA4-120, User Manual

Page: 31 / 81

Four-Channel Digital Video Recorder
System Check Screen
Highlight
System Check in the Main menu and press the button. The System Check setup
screen appears.
Figure 27 — System Check screen.
Highlight the box under the
On/Off heading and press the button. This toggles between On and
Off
. When it is
On
, the DVR reports a fault condition if it does not detect any recording or if there
is an alarm during the designated time.
Highlight the box under the
Interval heading and press the button. A slide bar appears allowing
you to set the check interval from 1 Hour to 30 Days.
The
Status field displays the fault conditions. When it is Good , there was recording or an alarm
occurred during the designated time. When it is Bad , there was no recording or no alarm occurred
during the designated time.
Highlight the box beside the
On Record Problem: Alarm Out and press the button. A drop
menu displays the available alarm outputs for the recording problem. Highlight the desired alarm
output from no alarm output, external alarm out terminal or internal buzzer, and press the
button.
21