Attacus FireFly AP1000, Manual

Page: 31 / 44

27
FireFly Training & Indoor Cycling
2) During an Activity:
2-1) Press or to view real-time data.
2-2) Repeat step 1-2) to 1-4) to change Set Target.
4) Ending an Activity:
3-4) To stop the turning pedals, please slow down your pedaling speed or press the
brake. The display time will stop automatically once the pedaling has stopped
2
.
3-5) If you would like to resume, please continue pedaling.
3-6) If you would like to end the activity and exit, press .
5) View your activity summary:
4-1) When an activity is over, press or to view different workout summary.
4-2) Press to end the summary and reset the console
3
.
Notice!
⚫
The console will not store data. It is highly recommended that you train with Ala
Fitness ( see 5.5 Application and Compatibility ), or pair the console with Attacus
Optical Heart Rate devices to collect and analyze your workout data.
⚫
Be sure to check if your data has been stored in your compatible devices right after
an activity.
⚫
This equipment is embedded with self-generator. The generator sustains enough
energy for the console to function. Therefore, for energy preservation, the console
will turn off automatically after few minutes of no pedaling.
Footnote
1 If you have a heart rate device, be sure your heart rate is broadcasted on the screen
before you start pedaling.
2 The pausing period is 1 minute by default, if the pedals are not moving and no
action is received from the buttons, the console will stop the timer and show a
summary after the 1 minute countdown. If you would like to prolong the pausing
period, please see
5.3.2 Set up > Pause time for more instruction.
3 If there is no operation on the buttons, the screen will return to the starting page
after 3 minutes.