Atronic e-motion, Operating Manual

Page: 54 / 59

54
April 2007
e-motion™ Operating Manual - B-Level STD
Knurled nut
Cable
holding
device
T
ECHNICAL
P
ROCEDURES
REMOVE PLAYFIELD
To remove the playfield assembly, follow these steps:
1. Open the maindoor.
2. Unplug all playfield cables that are connected to
the machine (two harnesses) and cut all cable ties
that fixes these cables.
3. Unscrew the knurled nut and remove the upper
screw that fixes the playfield motor. Lift the Play-
field a bit to remove the screw.
4. Make sure that both harnesses are completely un-
plugged and unfixed.
5. Remove the cable holding device.
6. Lift the playfield to its upper position and take it
out.
Note :
(for machines manufactured before 2005)
Pay attention not to loose the copper slide bea-
ring bushes which are pinned to the rear of the
playfield.
It is recommended to write down connectors and
cable routing before unplugging the cables.
!
!
It is recommended to carry out this procedure
with two persons. One person removes the play-
field while the second person guides the cable
harnesses through the maindoor cable recess.
Caution!
The playfield assembly is heavy.
!
!