Atronic e-motion, Operating Manual

Page: 12 / 59

12
April 2007
e-motion™ Operating Manual - B-Level STD
MONEY IN
Depending on hardware configuration, the machine
accepts coins/token and bills for cash in. Additionally
the machine is prepared for ticketing (optional) and
wagering account transfers (optional), and supports
legacy bonusing and remote key credit function.
Coin In
Atronic e-motion™ machines usually accept one
specific type of coin or token, determined by customer
specification. Coin in mechanics, coin acceptor and
hopper are customized to this specific coin size and
weight to provide highest performance, reliability and
security. Multichannel/multicoin operation is
(optionally) supported by B1.2.1 and B1.2.3 versions.
Bill In
Atronic e-motion™ machines utilize JCM
®
WBA/UBA-
type bill acceptors to provide highest acceptance rates
and best reliability. The decal below the bill in specifies
accepted currency and bill denominations. The
acceptance of each bill denomination can be enabled/
disabled seperately.
Voucher In / TITO (optional)
Optionally the machine supports voucher redemption
and issue (Ticket In / Ticket Out) using enhanced or
system validation mode. Connection to a fibre optic
network requires optional Atronic fibre optic kit.
Cashless / Smart Card
(optional)
The wagering account transfer (WAT) function allows
cashless transfers from/to a casino managed wagering
account by means of an external cashless wagering
system. Card handling is managed by an (optional)
player interface.
Support of WAT functionality is application- and
software-dependent.
Note :
In order to allow voucher
redemption, an optional ticket
in dongle (obtainable from
Atronic) has to be installed.
G
AMEPLAY
Note :
Customized machines may use
a different hardware setup
other than described.
Note :
In order to allow cashless
transfers using player cards,
an optional player interface /
card terminal has to be
installed.