background image

4

April 2007

e-motion™ Operating Manual - B-Level STD

I

NTRODUCTION

INTRODUCTION

This manual aims to provide qualified technical service

staff with detailed information, how to operate and

maintain an Atronic 

e-motion™

 video slot machine.

Atronic e-motion™ machines use Atronic's Hi(!)bility™

technology platform. Information included in this

document relates to machines that use Hi(!)bility™

B-Level game software.

Release B1.2.3 STD

using Base version

HBS-STD-7.0.2.496

NOTE!

The information in this manual includes the most up-to-date

information available just prior to print. All part numbers and

descriptions have been carefully reviewed and checked for

accuracy. All drawings and diagrams contain the latest (newest)

revision released by Atronic. If earlier revisions of diagrams or

drawings are required, please contact your Atronic Technical

Services representative.

NOTE!

Information in this document is subject to change without notice

and does not represent a commitment on the part of Atronic.

No part of this manual may be reproduced or transmitted in any

form or by any means, electronic or mechanical, including

photocopying and recording, for any purpose other than the

purchaser’s personal use without written consent of Atronic.

© Copyright Atronic, 2007. All rights reserved.

Atronic International

Borsigstr. 26

32312 Luebbecke, Germany

(+49) 5741 273 720

FAX (+49) 5741 273 727

Summary of Contents for e-motion




























































Reviews: