Atronic e-motion Operating Manual Download

Page: 5 / 59

April 2007

e-motion™ Operating Manual - B-Level STD

NTRODUCTION

ADDITIONAL MANUALS

Following topics are covered by additional manuals:

• Installation and Commissioning

(incl. safety instructions, technical data, etc.)

->See manual "Installation" for e-motion™ cabinets.

• Setup, Configuration and Software Reference.

->See manual "Software / Basic Setup" for

game software version B-Level 1.2.3.

• Linked Progressive Jackpot Configuration

->See manual "Progressive Jackpots" within folder

"Applications" on Atronic Service Manual CD.

• Peripherals

(coin- and bill acceptors, hopper, printer, etc.)

->See folder "Peripherals" on Atronic Service

Manual CD.

• Spare Parts

->See "Parts Catalogue" for e-motion™ cabinets.

All mentioned manuals can be found on a CD-ROM

titled "

Atronic Service Manual 2007

If this manual did not came with this CD-ROM, please

ask Atronic Technical Service for a free copy.

Summary of Contents for e-motion




























































Search results

Summary of Contents for e-motion

Reviews:

Related manuals for e-motion

Brands by name

Popular brands

Atronic e-motion, Operating Manual

Search results

Summary of Contents for e-motion

Reviews:

Related manuals for e-motion

Brands by name

Popular brands