16
4.2.5 Light sources
)
Do not look directly into the light outlets.
)
Because of the high energy of the light there is a large
amount of heat emission at the point of the optical
system.
)
Switch the light off when you do not require the light over
a prolonged period of time.
Light package LED economy:
• Select the light source with the switch
1
(fig. 12).
Light package 2-channel with 2 or 4 channels:
Switch on
• Remove the light guide from the holder (
4
, fig 13) or the
headlight from the headlamp suspension (
3
, fig 13).
)
You can manually switch on the light source with the
buttons 1 to 4 (
5
, fig. 13) .
Intensity control
• Switch on the light source.
• Press the button
1
(fig.13), to reduce the brightness or
press
2
, to increase the brightness.
)
When the device is switched off the last adjustment will
be kept.
Fig. 12. Light package LED economy:
Switch for selecting the light source
Fig. 13. Light package 2-channel with 2 or 4 channels:
Reduce brightness
Increase brightness
Headlamp suspension
Holder for the light guide
Selection of the light channel
4.2.6 Mirror quick-heater
• Switch on the mirror quick-heater with key switch (
2
, fig.
14). The mirror quick-heater heats up for 10 seconds and
then switches off automatically.
• Supply voltage of the heating coils: 6 V / 15 A.
• Hold the mirror to be heated over the burning heating coil
(
1
, fig. 14) located beneath the safety cover.
)
Prior to use of the mirror, always check its temperature
(with hand etc.)!
)
Automatic switching to avoid overheating!
)
Safety cover, sleeve and heating element might be very
hot. Do not touch directly after heating-up (hot)!
• Changing the heating coil, see chapter 6.4.
Fig. 14. Mirror quick heater
Heating coil
Push-button
4.0 Operation
1
1
4
3
2
5
1
2
1
1
2
3
4
5
1
2
