manualshive.com logo in svg

Atlas BCX Series, Operating Manual

Share
Download
Atlas BCX Series Operating Manual Download Page 53

                                          

BCX Series Operating Manual                               Page  53

 

 
 
There are four TOUCH PANEL keys under the DISPLAY area (as previously described).  

Press any of the three left keys 

 and the DISPLAY area will show: 

 
 
 

 
 

Pressing the far left key will darken the display.  Pressing the key second from the left 
will lighten the display.  Pressing the key all the way to the right will return the controller 
to the previous screen. 
 

Experiment with this section by using the various 

 keys to adjust the contrast to 

a comfortable level.   
 

When the display area is adjusted properly, press the extreme right 

 key to save 

the change.  The DISPLAY area will show: 
 
 
 
 

Now 

PUSH 

the HOME Key

  one time.  This will put the controller back to the 

main menu page. 
 

 Setup 
     Contrast Adjust 

Setup 
             Dark       Light                      Back 

Summary of Contents for BCX Series




























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands