Page 48
BCX Series Operating Manual
G. PASSWORD
This section will instruct the operator on how to use the password page of the controller.
There are 6 different passwords used in this controller as listed below:
Page name
Password Level
Password
Profile Set-up
2
2
Manual 3
3
Machine Set-up
4
4
Password 5
5
Display Set-up
5
5
Calibration 6
Not
published
OEM Set-up
7
Not published
Each password level will activate its level as well as all levels below. For example,
entering the password for level 2 will open up level 1 and 2. However, entering the
password for level 5 will open all levels from 1 through 5.
When a password is entered, an internal timer is activated in the controller that will allow
the user to move in and out of that level as needed. When the timer has elapsed, the user
must re-enter the password in order to gain access to the level again.
NOTE: Certain passwords, such as for levels 6 & 7, are not published and can only be
entered by qualified ATLAS service personnel.
To change a password:
Start from the very first page of the operator interface. If not already there,
PUSH
the
HOME Key
one time. When at the first page, the DISPLAY area should
show:
Now
PUSH
the right arrow
key four times . The DISPLAY area will show:
Select Operting Mode
1>AUTO
Select Operting Mode
5>Password
