Atlas APEX-10, Installation & Operation Manual

Page: 6 / 75

Important Safety Instructions 6 Apex-10 / Apex-10H
Important Safety Instructions
Please read carefully
• Read all instructions and warnings thoroughly before servicing, or
maintaining the lift;
• Inspect the lift daily. Never operate if there are broken or damaged parts
or if the lift is malfunctioning;
• Do not operate if there are damaged cords or if any piece of the equipment
has been dropped or damaged until it has been examined by a qualifi ed
professional;
• Do not touch hot parts as burns can occur;
• Keep area well lit at all times and do not use in damp or wet locations;
• Do not let any cords come in contact with hot manifolds or moving blades;
• A cord with a current rating equal to or more than that of the equipment
should be used if an extension cord is necessary. Cords rated for less
current than the equipment may overhead. Be careful to avoid putting in
an area where it could be tripped over or interfered with;
• Always unplug equipment when not in use. Do not attempt to grab the
cord, grasp plug to disconnect;
• Allow equipment to cool completely before storing away. Loop cord loosely
around the equipment when storing;
• To reduce the risk of fi re, never operate near open containers of fl ammable
liquids (for example, gasoline);
• Adequate ventilation should be provided when working on or operating
internal combustion engines;
• Always keep loose clothing, hair, fi ngers, and all parts of the body away
from any moving parts;
• To reduce the risk of electric shock, never use on wet surfaces or expose to
rain;
• Always wear safety glasses. Everyday glasses are not safety glasses and do
not provide adequate protection;
• Use only as described in this manual – use only Atlas Automotive
Equipment optional accessories and attachments;
• Never attempt to overload the lift. The rated capacity is shown on the
identifi cation label;