Installation
41
Apex-10 / Apex-10H
• Once an arm is installed, make sure to check that each anti-rotation gear
meshes and stays aligned very well. If not, remove the anti-rotation gear
and install it in the opposite position;
• After checking that each anti-rotation gear and the toothed gear are
aligned well, tighten the bolts;
• Repeat the above procedure to install other arms.
Pay attention to
the pinch point!
Figure 27
Pay attention to the
beveled gear orientation
Figure 29
Figure 28
Summary of Contents for APEX-10
