ATLAS North America Proprietary
Sea Scan ARC Scout MKII Operations Manual
1 of 1
Page: 18
Issue: 1.2.4
SCTM2-OPS
Operations Manual
Channel SDS Sonar Type
This sets the sonar channel type (wSonarType) in the SDS SNR2 data. For more information on why these
need to be changed from their defaults please refer to the Channel Operation section.
The default values are:
Master
Master
Slave
Slave
Channel
0
1
2
3
Enabled
Enabled
Enabled
Enabled
Enabled
Bandwidth
150 kHz
150 kHz
150 kHz
150 kHz
Resolution
~0.50 cm
~0.50 cm
~0.50 cm
~0.50 cm
SDS Sonar Type
STARBOARD
STARBOARD2
PORT
PORT2
Range
30.0 m
30.0 m
30.0 m
30.0 m
Range Delay
0.0 m
0.0 m
0.0 m
0.0 m
Channel Settings (Single Frequency - 2 Channel Operation)
Settings may be adjusted individually for each of the Scout MkII's 2 channels in the standalone Single
Frequency configuration. The channels are divided into columns. The channels are labeled Master: 0, 1 .
Note: The Single Frequency system utilizes Channels 0 and 1.
Channel Enabled
This settings enables or disables the channel.
Channel Bandwidth
The bandwidth setting allows the user to choose a CHIRP bandwidth that the channel will use for
transmitting and receiving. This setting is not available in the Sonar Control Panel. Changing the
bandwidth may reduce interference issues during operation. Please note that the across track resolution is
directly related to the CHIRP bandwidth. The narrower the bandwidth the lower the across track
resolution. When the bandwidth is changed the application settings page will change the resolution
displayed below the bandwidth accordingly.
Channel SDS Sonar Type
This sets the sonar channel type (wSonarType) in the SDS SNR2 data. For more information on why these
need to be changed from their defaults please refer to the Channel Operation section.
The default values are:
Master
Master
Channel
0
1
Enabled
Enabled
Enabled
Bandwidth
150 kHz
150 kHz
Resolution
~0.50 cm
~0.50 cm