Atlanta Stretch S.p.A.
5
1.1.5
Loading of parameters:
takes place automatically by selecting the
desired programme.
Saving of parameters:
if the LED of the
RESET
key
(E)
is turned off,
press the
RESET
key for more than 4 seconds. This LED will start to
flash rapidly to indicate that the parameters have been saved.
The program P=00 is read-only and it is configured with default values.
Up to 99 programmes can be created (based on the machine
model):
To copy the parameters of an existing program on a virgin
program, select the program source, press and hold
RESET
and act
on
P+
and
P-
buttons to select the target program. Release the
RESET
button within 4 seconds the parameters will be copied only, if held
down for more than 4 seconds and then released, will be copied and
saved.
NB
: The virgin target programme must always be released (
F00
=1) (LED
of the
RESET
key
(E)
is turned off).
Automatic opening of the program used previously.
When the machine is turned on again, the parameters from the last
programme selected and started will be loaded.
Keyboard block/ release:
prevents modification of parameters by
blocking the keys
V+
e
V-
; hold down at the same time
F+
and
F-
and
then press
RESET
to enable / disable the block. When the active function
the right LED of the display
(V)
lights up and stays lit.
The disabled/enabled status remains even after the machine has been
turned off and on again.
See Picture 1 - pag. 1
See Picture 2 - pag. 2
See Picture 3 - pag. 3
Summary of Contents for EVA
