Atlanta EVA, Manual

Page: 16 / 32

Rev.0 13/01/2020
Operator Panel | TURNTABLE - MAST
12
DISPLAY (V)
1 2 3
Disable/enable keypad: prevents modification of parameters by
blocking the icons V+ e V- ; press, in order, the icons SAVE (M) , F+ , F- ,
DISABLE KEYPAD (W) . When the function is enabled, the right LED on
the display V turns on and remains steady.
The disabled/enabled status remains even after the machine has been
turned off and on again.
Picture 7 - DISPLAY (V)
1) indicates the decimal point (values from 0.00 to 9.99)
2) indicates the decimal point (values from 0.0 to 99.9)
3) indicates the block status of keyboard
ON: keyboard blocked ( V+ and V- blocked)
OFF: keyboard released ( V+ and V- unlocked)
Signals
The LED on the right of the display (F) indicates the writing protection
status of the selected program. If it is on, it is not possible to rewrite
the edited parameters. In order to make edits, it is necessary to select
the F00 parameter of the same program, set the value 1 and then save.
If you wish to save an already saved program and lock it while in writing
mode, access the F00 parameter again, then set 1 (padlock open) and
then 0 again (padlock closed); then save.
Indication of the film consumed
At the end of each cycle (or by selecting the parameter CF on the
display (F) , the machine will indicate the consumption of the film in
grams on the display (V) and showing CF on the display (F) . To obtain
good precision, correctly set the thickness of the film in the parameter
F24 .