Atlanta EVA, Manual

Page: 25 / 32

Atlanta Stretch S.p.A.
21
2.4
DANGER
The cycle “up/down with pause” is required for maximum height
of the product to be wrapped at 1500 mm. Beyond this height,
you must use appropriate personal protective equipment based
on the risk of falling and work height exceeding 1500 mm.
Automatic Up and Down cycle or Up only with a pause when the top of
the product being wrapped is reached; before the pause the carriage
can descend by a distance set with F23 . The machine stop and wait to
restart emitting a slow intermittent signal. If the machine has a presser,
it ascends for the amount of time set in F60 .
To complete the paused wrapping cycle press the start cycle button
(A) .
If the cycle set is for ascent and descent, the carriage ascends, performs
the top rotations, descends toward the base, and then the cycle stops.
If the cycle set is for ascent only, the carriage ascends, performs the
top rotations, and then the cycle stops.
See Picture 8 - pag. 19
See Picture 8 - pag. 19
After setting the semiautomatic cycle press START (A) .
The table starts rotating again and the pallet wrapping phase begins.
Press buttons
(B) and (G) to wrap the pallet. To stop the machine, press
the button (H) .
Automatic cycle that allows the pallet to be wrapped in steps.
The carriage ascends to the height set in
F30 , performs a number of
rotations set in F31 , and repeats until the top of the product is reached.
During the reinforcement rotations, the tension and lengthening of the
film can be adjusted using the parameters set in F32 and F33 .