Atlanta Stretch S.p.A.
7
Indication of the film consumed
At the end of each cycle (or by selecting the parameter
CF
on the display
(F)
), the machine will indicate the consumption of the film in grams
on the display
(V)
and showing
CF
on the display
(F)
. To obtain good
precision, correctly set the thickness of the film in the parameter
F24.
NOTE
: It is also possible to order models with film consumption
expressed in metres. In this case as well, to obtain good precision,
correctly set the diameter of the measurement roller in the parameter
F24
.
Turntable end carriage in-phase stop
Through the combination of multiple buttons you can stop in-phase
the machines.
Pressing the button
(H)
and, keeping it pressed, press the button
(E)
,
the turntable rotates until it reaches a predetermined position (called
stop in-phase) and then stops.
Pressing the button
(G)
, and keeping it pressed, press the button
(E)
,
the carriage falls to the low position and then stops.
Press the button
(B)
and, holding it down, press the button
(E)
. The
presser automatically ascends to the start cycle top position.
Summary of Contents for EVA
