Atlanta EVA, Manual

Page: 13 / 32

Atlanta Stretch S.p.A.
9
A Icon START programmed cycle (press and hold for more than 3
seconds).
B Press and hold to lift the carriage manually.
C Program decrease icon.
D Program increase icon.
E RESET the machine cycle.
F 2-digit display showing the functions (parameters) of the
selected programme;
During the cycle it shows the current operating status;
CF on the display (V) at the end of the cycle means the film is
depleted;
AA on the display (V) means there is an alarm on the machine;
The left point indicates the descent of the film carriage. The
right point is equivalent to the LED on the RESET button on the
key panels.
G Press and hold to lower the carriage manually.
H Rotate the table manually, press and hold and the table stops at
the end of the cycle.
I Lower carriage, the carriage lowers automatically down to its
position at start of cycle.
J Cursor for increasing and decreasing values.
K Resets the alarms and stops the buzzer.
L Press and hold to lift the pressure roller manually.
M Save parameters.
N Rotate table, the table rotates automatically to its phase position.
O STOP cycle icon, the table slows down and stops instantly; the
cycle can continue from the same point.
P 2-digit display showing the selected programme;
During the cycle it shows an animation of the rotation of the
platform;
NOTE : the flashing display indicates that a parameter has been
changed;
The right point indicates the ascent of the film carriage, the left
point indicates the rotation of the platform or the robot path;
In the robots, the left point flashing indicates that the battery is
in reserve.