manualshive.com logo in svg

Aticio 816, Operating Instructions Manual, Page: 502 / 580

Share
Download
Aticio 816 Operating Instructions Manual Download Page 502

Remarks

98

9

Access to the Machine

Place the machine near the power source, providing the clearance areas shown.

1.

Rear: 6 cm (2.4") or more

2.

Right: 1 cm (0.4") or more

3.

Front: 75 cm (29.6") or more

4.

Left: 1 cm (0.4") or more

Note

❒

For the required space when options are installed, contact your service repre-
sentative.

When Not Used for a Long Time

R

 

CAUTION:

Note the following:
• If the machine has not been used recently, it requires time to initialize so can-

not start printing immediately. Leave the machine switched on and wait
about ten minutes.

•

For safety reason, unplug the power cord from the wall outlet if the machine 
will not be used for an extended period of time such as holidays.

Summary of Contents for 816





































































































































































































































































































































































































































































































































































































Reviews:

No comments