Aticio 816, Operating Instructions Manual, Page: 185 / 580

Administrator Tools
95
4
❖
Select Dial/Push Phone
Use this function to select a line type.
Dial and Push lines are available for selection.
The default setting is
Push Phone .
This function is not available in some areas.
A
Select [ Fax Features ] using
{U}
or
{T}
, and then press the
{
OK
}
key.
B Select [ Administrator Tools ] using
{U}
or
{T}
, and then press the
{
OK
}
key.
C
Select [ Select Dial/Push Phone ] using
{U}
or
{T}
, and then press the
{
OK
}
key.
D
Select [ Push Phone ] or [ Dial Phone (10PPS) ] using
{U}
or
{T}
, and then press
the
{
OK
}
key.
❖
G3 Analog Line
You need to make the following settings for the G3 Analog Line before you
connect the machine to a standard G3 analog line.
• When your machine is connected through a PABX, set to Extension. If it is
connected directly to the telephone network, set to Outside.
• Outside Access No.
Use this setting if your machine is connected to a PABX that requires you
to dial a certain number such as "0" followed by a pause to connect to the
outside line. By programming "0" as the PSTN Access Number, a pause
will be inserted automatically after the "0" when dialing.
A Select [ Fax Features ] using
{U}
or
{T}
, and then press the
{
OK
}
key.
B
Select [ Administrator Tools ] using
{U}
or
{T}
, and then press the
{
OK
}
key.
C Select [ G3 Analog Line ] using
{U}
or
{T}
, and then press the
{
OK
}
key.
D
Select [ Extension/Outside ] using
{U}
or
{T}
, and then press the
{
OK
}
key.
E Select [ Extension ] or [ Outside ] using
{U}
or
{T}
, and then press the
{
OK
}
key.
F Select [ Outside Access No. ] using
{U}
or
{T}
, and then press the
{
OK
}
key.
G
Enter the Outside Access No. using the number key, and then press the
{
OK
}
key.
You can program the number up to two digits.
If you make a mistake, press the
{
Clear/Stop
}
key, and then enter again.
H
Press the
{
User Tools/Counter
}
key.