manualshive.com logo in svg

Aticio 816, Operating Instructions Manual, Page: 21 / 580

Share
Download
Aticio 816 Operating Instructions Manual Download Page 21

7

R

 

CAUTION:

 

 

•

Avoid getting toner on your clothes or skin when removing a paper jam or 
replacing toner. If your skin comes into contact with toner, wash the affected 
area thoroughly with soap and water.

•

If toner gets on your clothing, wash with cold water. Hot water will set the 
toner into the fabric and may make removing the stain impossible.

•

Do not look into the lamp - it can damage your eyes.

•

When loading paper, take care not to trap or injure your fingers.

•

During operation, rollers for transporting the paper and originals revolve. A 
safety device is being installed so that the machine can be operated safely. 
But take care not to touch the rollers during operation. An injury might occur.

•

Fire and breakdown can result from heavy accumulation of dust inside this 
machine. Consult your service representative for details about and charges 
for cleaning the machine’s interior.

•

If you have to move the machine when the optional paper tray unit is at-
tached, do not push on the main unit's top section. Doing so can cause the 
optional paper tray unit to detach, possibly resulting in injury.

Summary of Contents for 816





































































































































































































































































































































































































































































































































































































Reviews:

No comments