manualshive.com logo in svg

Aticio 816, Operating Instructions Manual, Page: 100 / 580

Share
Download
Aticio 816 Operating Instructions Manual Download Page 100

Connecting the Machine

10

1

Connecting to the USB Interface

This section describes how to connect the USB2.0 interface cable to the USB2.0
port.

A

Connect the USB 2.0 interface cable to the USB 2.0 port.

B

Connect the other end to the USB port on the host computer.

Note

❒

This machine does not come with a USB interface cable. Make sure you
purchase the appropriate cable for the machine and your computer.

❒

The USB 2.0 interface board is supported by Windows Me / 2000 / XP,
Windows Server 2003, Mac OS X10.3.3 or higher.
• For Windows Me:

Make sure to install "USB Printing Support". When used with Windows
Me, only a speed equal to that of USB 1.1 is possible.

• For  Mac  OS:

To use Macintosh, the machine must be equipped with the optional
PostScript 3 unit. When used with Mac OS X10.3.3 or higher, a transfer
speed of USB 2.0 is supported.

❒

For details about installing the printer driver, see "Preparing the Machine",
Printer Reference.

Reference

"Preparing the Machine", Printer Reference

A

RH004

S

Summary of Contents for 816





































































































































































































































































































































































































































































































































































































Reviews:

No comments