manualshive.com logo in svg

Aticio 816, Operating Instructions Manual, Page: 152 / 580

Share
Download
Aticio 816 Operating Instructions Manual Download Page 152

System Settings

62

2

❖

Program/Change Admin.

For details about this function, consult your administrator.

❖

Key Counter Management

Specify that functions that you want to manage with the key counter.
• Copier
• Facsimile
• Printer
• Scanner

❖

Extended Security

Specify whether or not to use the extended security functions. For details
about this function, consult your administrator.

❖

Prog/Chnge/Del LDAP Server

By registering the LDAP server, you can search the LDAP server's address
book for an recipient's e-mail address when sending files by e-mail using the
scanner or fax functions.
• Name
• Server  Name
• Search  Base
• Port  No.
• SSL
• Authentication
• User  Name
• Password
• Search Conditions
• Search  Options
To start an LDAP search, make sure that the items listed below are set. For
other items, check your environment and make any necessary changes.
• Server  name
• Search  Base
• Port  No.
• Search Conditions
• Authentication
To use the LDAP server in Administrator Tools, select 

[

On

]

 under 

[

LDAP

Search

]

.

This function supports LDAP Version 2.0 and 3.0. Version 2.0 does not sup-
port High Security authentication.
For details about programming, changing, or deleting the LDAP server, see
"Program/Change/Delete LDAP Server".

Summary of Contents for 816





































































































































































































































































































































































































































































































































































































Reviews:

No comments