Aticio 816, Operating Instructions Manual, Page: 173 / 580

Copier Features
83
3
❖
Original Count Display
You can set to display the count of originals and copying pages on the display
when
[ On ] is selected.
The default setting is Off .
❖
Reproduction Ratio
You can select which reduce, enlarge, or input ratio is shown on the display
with priority when
[ Reduce ] or [ Enlarge ] is selected.
Reduce or Enlarge ratios for setting are as follows:
The default setting for "Ratio 1" is
50% (Metric version) / 65% (Inch version).
The default setting for "Ratio 2" is 71% (Metric version) / 78% (Inch version).
The default setting for "Ratio 3" is 93% (Metric version) / 93% (Inch version).
The default setting for "Ratio 4" is 141% (Metric version) / 129% (Inch ver-
sion).
The default setting for "Ratio 5" is
200% (Metric version) / 155% (Inch ver-
sion).
You can set a ratio other than the above.
A
Select [ Reproduction Ratio ] using
{U}
or
{T}
, and then press the
{
OK
}
key.
B Select the ratio you want change using
{U}
or
{T}
, and then press the
{
OK
}
key.
C Select [ User R/E Ratio ] using
{U}
or
{T}
, and then press the
{
OK
}
key.
D
Enter a ratio using the number keys from "50-200", and then press the
{
OK
}
key.
The “programmed” message appears.
❖
Preset R/E Priority
You can set the ratio with priority when [ R/E ] is selected.
Using the number keys, enter the ratio from "50-200" in units of 1%.
The default setting is
71% (Metric version) / 65% (Inch version).
❖
Duplex Margin
Specify left margin on the back side of copies, and top margin on the front
side. Select
[ Top Margin ] or [ Left Margin ] , and then set the required value.
• Top Margin: 0-50mm, 0"-2.0"
• Left Margin: 0-50mm, 0"-2.0"
The default setting is
5 mm (Metric version) / 0.2 inch (Inch version).