manualshive.com logo in svg

Aticio 816, Operating Instructions Manual, Page: 443 / 580

Share
Download
Aticio 816 Operating Instructions Manual Download Page 443

When a Message Is Displayed

39

4

When a Message Is Displayed

This section describes the principal messages that appear on the display panel.
If a message not described here appears, act according to the message.

Reference

Before turning the main power off, see “Turning On the Power”, About This
Machine.

Status Messages

This section describes the machine status messages.

Message

Status

Ready

This is the default ready message. The machine is ready 
for use. No action is required.

Printing...

The machine is printing. Wait a while.

Waiting...

The machine is waiting for the next data to print. Wait a 
while.

Offline

The machine is offline. To start printing, switch the ma-
chine online by pressing the 

{

Online

}

 Key.

Please wait...

This message may appear for a few seconds. It means the 
machine is initializing or executing maintenance opera-
tions. Wait a while.

Resetting Job...

The machine is resetting the print job. Wait until 
“

Ready

” appears on the display panel.

Setting change...

The machine settings are being changed. Wait a while.

Hex Dump Mode

In Hex Dump mode, the machine prints received data in 
hexadecimal format. Turn off the machine after printing, 
and then turn back on. Hex Dump mode is used for ad-
vanced troubleshooting.

Summary of Contents for 816





































































































































































































































































































































































































































































































































































































Reviews:

No comments