Manual, FT Sensor, Ethernet Axia
Document #9610-05-Ethernet Axia-05
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 • Tel:+1 919.772.0115 • Fax:+1 919.772.8259 •
• Email:
31
6. Java Demo Application
The Java demo application provides a simple interface to view and collect F/T data from a connected computer. The
computer will need to have Java version 6.0 (runtime 1.6.0) or later installed. (Java can be downloaded from
6.1 Starting the Demo
The demo can be downloaded from the Demo page.
1.
Click the “Download Demo Application” button and follow the browser’s instructions.
•
The file ATINetFT.jar will be downloaded. If the browser does not automatically run the
downloaded file, manually open the file on your computer.
Figure 6.1—Demo Page
NOTICE:
The Java Demo requires the Ethernet F/T to have its RDT Interface enabled. RDT is
enabled in the Ethernet F/T by default. See
Section 5.6—Communication Page (comm.htm)
for
information on RDT settings.
•
The demo program opens with the following window:
Figure 6.2—Ethernet IP Address Request
•
If the window does not appear, it may be hidden under the browser window. In this case you may
have to minimize the browser window.
2.
Enter the IP address of the sensor.
•
The IP address of the sensor is displayed on the Demo page in the paragraph above the “Download
Demo Application” button.
3. Select “OK”.
•
The main window of the Java Demo application should open.