ATEN VM3404H User Manual Download Page 70

Page: 70 / 118

VM3404H / VM3909H User Manual

General

The General page has three sections: Fan Status, Device Info, and Other.

Fan Status



This section displays the internal temperature and status of the cooling
fans.



Fans rotate to indicate they are working.*

Note:

Use the drop down menu to select fan speed: Auto, High,

Medium and Low.If the fans have stopped working or are switched
off, they will appear as follows. The fan module will then need to be
replaced or reset.

Device Info



This section lists the Video Matrix ports, Model Name, Firmware
Version, and connection status.

Other



Use the

Language

drop - down menu to select a preferred user

interface language. Options include: English, French, German, Italian,

Summary of Contents for VM3404H























































































































Search results

Summary of Contents for VM3404H

Reviews:

Related manuals for VM3404H

Brands by name

Popular brands

ATEN VM3404H, User Manual

Search results

Summary of Contents for VM3404H

Reviews:

Related manuals for VM3404H

Brands by name

Popular brands