•
Master:
this indicates the device on which the scheduler task will happen.
•
ID:
displays the ID number of the task.
•
Name:
display the scheduler task name. This name can be entered in the scheduler task window.
•
Enable:
indicates if the task is enable or not (ticked means enable).
•
Occurrence:
under the occurrence display you will find all information about the type of event and
the way it will be triggered.
o
Type:
displays the type of the task: single or cycle. Single is a task that will only happen
once, cycle could be a repeating task (see below under how to set a task).
o
Repeat:
displays if the task is repeated daily, weekly, monthly or a single task.
o
Start Time:
displays the time at which the task starts.
o
End Time:
displays the time at which the task stops. Note: if the task is a Single task,
start time and end time will be the same.
•
Target:
display which event is affiliated to the task.
______________________________________
•
Select All:
allows to instantaneously select all the tasks from the list
•
Select None:
allows to instantaneously deselect task selected from the list
•
Del:
allows to delete selected task from the list
•
Add:
allows to add a new task to the scheduler
•
Edit:
allows to edit one task parameters
•
Close:
close the scheduler window.
______________________________________
How to set a task:
To add a scheduler task click on the Add button in the scheduler window. Then the Scheduler Task
window will pops up.
Ateïs International
Ch. du Dévent, 1024 Ecublens, Switzerland.
Phone : +41 21 881 25 10
113
