manualshive.com logo in svg

Atec Solmetric SunEye 210, User Manual

Share
Download
Atec Solmetric SunEye 210 User Manual Download Page 61

3-5  

Using the SunEye 210 Desktop Companion Software

Exporting and Generating Reports 

Figure

 

3-5.

 

Obstruction Elevation Parameters

By default, the values previously entered in the hand-held device’s 

View

 > 

Obstruction Eleva-

tion

 are loaded automatically, however they can be changed for the report. For more information 

about these values, 

refer to “Obstruction Elevation View” on page 2-23

. 

Figure

 

3-6.

 

Configure Windowed Access Parameters

• If you selected Solar Access, then click 

Next

 and define the start and stop dates, as shown above. 

This data is only required for the Average Windowed Solar Access data file, and the SkyXX Dai-
ly Solar Access data files.

4

The Export tool gives you the opportunity to specify a specific location to store the report and the 
ability to select your company logo which will appear in the report.

Summary of Contents for Solmetric SunEye 210



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands