2-1
Using the SunEye
Power-up the SunEye 210
2
Using the SunEye
This chapter contains step-by-step instructions for the basic use of the SunEye 210, including
the collection of solar access data.
Power-up the SunEye 210
1
If the battery has not been fully charged as described previously, connect the power cable to the
DC power port located on the right side, under the rubber I/O door.
2
Press the
Power
button.
Set correct Date and Time
1
Select menu icon
at the bottom-left of the screen. You will see the SunEye menu.
2
Alternatively, press the center navigation button to bring up the menu.
3
Select
to access the Tools menu
4
Select
Set Date and Time...
5
Enter correct date, time, and time zone.
