manualshive.com logo in svg

Atec Solmetric SunEye 210, User Manual

Share
Download
Atec Solmetric SunEye 210 User Manual Download Page 34

2-18  

Using the SunEye

Align with Compass/Align with Target

mode.

Figure

 

2-30.

 

Set Target with Manual Entry

3

Note that the sun paths are now in a fixed position and do not move when the instrument is tilted 
or rotated, as they do when in “Align with Compass” mode. Also note that the Compass is no 
longer displayed in the preview, because it is now assumed to be invalid.

4

Take the skyline by aligning the SunEye device with the Target and holding it level. The screen 
will have a reference line as an aid to point the device at the Target’s azimuth. The center top of 
the screen is pointing to the Target azimuth.

Figure

 

2-31.

 

Set Target Skyline Screen

N O T E

It may be more difficult for the user to stay out of the sun paths in Align to Target mode than in 
Align to Compass mode. The center top of the screen is now the target, and the sun paths to the 
South (or North in the Southern Hemisphere) may be displayed on the SunEye at an angle relative 

Summary of Contents for Solmetric SunEye 210



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands