5
Dial #.
6
Once the report is completed, exit authorized caller
mode by dialing *#.
7
To disconnect, dial #.
LOST AUTHORIZED
If the default authorized caller code (789) is changed and
CALLER CODE
the new code is lost or forgotten, the default code can be
restored. However this procedure also restores all the
MERLIN II default settings so that any changed
programmed setting must be reentered and all
announcements must be rerecorded.
To
restore the default authorized caller code:
1
2
3
4
5
On the back of the MERLIN II Attendant, set
switches
1
and 2 to off (up).
Unplug the MERLIN II Attendant from its power
source.
With switches 1 and 2 still off (up), plug the
MERLIN II Attendant back into its power source.
Reset switches
1
and 2 to on (down).
Use the appropriate MERLIN IX Attendant Planning
Forms to reprogram your settings and rerecord your
announcements.
Troubleshooting 3 - 9
Summary of Contents for MERLIN II Attendant
Page 1: ...AT T MERLIN II COMMUNICATIONS SYSTEM MERLIN II Attendant Installer s Guide...
Page 21: ...FIGURE 1 4 Connecting the MERLIN II Attendant Connecting the MERLIN II Attendant 1 17...
Page 33: ...FIGURE 2 2 Supervised Transfer process 2 12 Programming Features...
Page 35: ...FIGURE 2 3 Immediate and Backup Call Handling 2 14 Programming Features...
