Programming System Features
PARTNER Systems
■
PARTNER II and PARTNER Plus system buttons should be assigned as follows; 1, 2, 3, and
4 are line or feature buttons (for a PARTNER system, buttons 1 through 4 are line only):
18
PMUTE
ON
MSG
RANGE
BATT
Setting the line ringing options: Use the following guidelines to ensure optimal voice
quality when using MDW 9010 phones with a PARTNER, PARTNER Plus, or PARTNER II
system in key mode:
AT&T Phone
System with Two Carriers
System with Three Carriers
System
(one control and one expansion
(one control and two expansion
carrier)
carriers)
PARTNER
1. Set Line Ringing for each
Not applicable: PARTNER
extension that has a radio
supports up to 12 phones.
module in the control carrier to
Ring.
2. Set Line Ringing for each
extension that has a radio
module in the expansion
carrier to No Ring. (Install an
external audible alert for these
extensions.)
PARTNER
1. Set Line Ringing for each
1. Set Line Ringing for each
PLUS,
extension that has a radio
extension that has a radio
PARTNER II
module in the control carrier to
module in the control carrier to
Ring.
Ring.
2. Set Line Ringing for each
2 . Set Line Ringing for each
extension that has a radio
extension that has a radio
module in the expansion
module in expansion carrier #1
carrier to Delayed Ring.
to Delayed Ring.
3 . Set Line Ringing for each
extension that has a radio
module in expansion carrier #2
to No Ring. (Install an external
audible alert for these
extensions.)
NOTE:
For PARTNER II hybrid systems that use pooled lines, set the Line Ringing options as
described in the above table if more than six MDW 9010 handsets have the same
pooled line appearance.
6-2
MDW 9010 Compatibility
